南海成因及其演化模式探讨          下载免费PDF全文

李学杰  王哲  姚永坚  高红芳  祝嵩  徐子英 《中国地质》2020,47(5):1310-1322

尽管南海已进行深入的调查与研究，提出多种成因模型，包括挤出模型、弧后扩张模型、古南海俯冲拖曳模型等，但因其所处构造位置特殊，周边构造环境经历了复杂的改造，所有成因模式均未能得到广泛的认可。本文从三大板块相互作用入手，结合南海实测数据，提出南海形成的弧后扩张—左旋剪切模型。认为南海是古南海往北俯冲的弧后盆地，菲律宾海板块往北漂移形成的大规模左旋走滑是南海扩张的触发因素。印度—欧亚碰撞产生中南半岛挤出主要影响西南海盆扩张方向，使得扩张轴从近东西向转为北东向。南海及邻区晚中生代以来的演化可以分为以下阶段：1）早白垩世开始澳大利亚板块往北漂移，新特提斯洋往北俯冲消亡，导致弧后扩张，形成古南海；2）晚白垩世末—始新世，古南海往北俯冲，导致弧后拉张形成陆缘裂谷；3）早渐新世，受菲律宾海板块西缘大型左旋走滑影响，在原有裂谷的基础上从东往西海底扩张，形成南海；4）渐新世末，受俯冲后撤的影响，扩张中心往南跃迁，同时受西缘断裂左旋活动的影响，扩张轴从近东西西逐步转为北东向；5）早中新世晚期，南沙地块—北巴拉望地块与卡加延脊碰撞，南海扩张停止。  相似文献   

我国深海钻探重入钻孔技术优选及设计思路          下载免费PDF全文

熊亮  谢文卫  卢秋平  朱芝同  刘晓林 《探矿工程》2020,47(7):1-7

深海钻探通常采用无隔水管开路钻进，当更换钻头或钻具，测井、处理孔内事故等情况时，需要起下钻后重新进入原钻孔，此过程称为重入钻孔。由于钻探船与海底孔口有数千米的水体相隔，受海浪和洋流作用，钻探船动荡不稳，钻杆柱摇摆不定，要想重新进入原钻孔并非易事。本文通过广泛调研，对海底基盘、声呐重入系统、水下电视重入系统及无人遥控潜水器（ROV）等目前几种常见的重入钻孔技术进行了详细介绍，对各种技术的优缺点进行了综合对比，优选了水下电视重入系统作为我国深海钻探重入钻孔技术方案，初步提出了技术设计思路，为样机研发和工艺制定奠定了基础。  相似文献   

福建北部近岸东台山岛火山岩形成时代、地球化学与古太平洋板块俯冲的响应          下载免费PDF全文

王飞飞  张勇  韩宗珠  宋维宇  吴浩  宁泽 《中国地质》2020,47(5):1426-1437

福建北部沿岸岛屿岩石组合以晚中生代火成岩为主，研究认为是古太平洋俯冲消减的产物，对反演洋盆构造演化具有重要的指示意义。本次对其中的福建北部海域东台山岛上广泛发育的酸性火山岩进行了锆石U-Pb定年以及全岩主微量地球化学分析工作。2件年代学样品分别获得了92 Ma和86 Ma的锆石U-Pb年龄，确定东台山岛火山岩形成于晚白垩世。全岩地球化学特征指示火山岩样品以酸性钙碱性岩石为主，整体富集Rb、Ba等元素，亏损Nb、Ta、Sr、Eu等元素，显示弧型岩浆岩的地球化学组成。研究认为东台山岛火山岩起源于古老下地壳变沉积岩熔融，并在浅层岩浆房内经历了不同程度的结晶分异过程。结合区域上晚中生代岩浆作用由陆向海的时空迁移特征，福建北部沿岸岛屿火山岩形成的深部动力学机制应该与古太平洋俯冲过程中的板片回转过程相关。  相似文献   

提高地浸钻孔出水量的有效技术措施          下载免费PDF全文

胥虹 《探矿工程》2020,47(1):48-52

地浸钻孔是一种以采矿为目的的钻孔，提高钻孔出水量就是提高钻孔的采矿量。通过对多年地浸钻孔施工经验和理论进行分析，发现影响钻孔出水量的主要因素为钻井泥浆的成分和性能以及人工过滤层的渗透性差异，提出在地浸钻孔施工方案中采用植物胶净化泥浆钻进和扩孔、投砾罐射吸式填砾、物理化学组合洗井3种技术措施，对比前后施工钻孔的出水量大小，证明了该技术措施对提高地浸钻孔出水量具有良好的效果。  相似文献   

国内外割心钻具研发概况与分析          下载免费PDF全文

李鑫淼  梁健  尹浩  王志刚  梁楠 《探矿工程》2020,47(7):47-55

在松散、松软、破碎等复杂地层钻进时，与常规取心技术相比，割心技术能够获得更高的岩心采取率。国内外研发的割心钻具主要包括双动双管、单动双管和绳索取心割心钻具3种，钻具研发的关键点主要包括岩心爪结构设计和加压方式选择。从钻具研发情况看，三角形岩心爪具有良好的闭合性能，液力加压能够实现对割心压力的准确控制，绳索取心割心钻具钻进效率较高，但研发难度相对较大。本文详述了国内外割心钻具的结构设计特点及取心操作流程，分析了钻具设计原理的优缺点，提出了割心钻具发展趋势，为割心钻具的优化设计奠定了基础。  相似文献   

钻探参数实时采集系统研制与应用          下载免费PDF全文

汤小仁  孟义泉  訾兵  梁日旺 《探矿工程》2020,47(6):46-53

钻探参数实时采集系统研制的目的是向钻探技术及管理人员提供直观的钻探实时参数，通过该系统可全天候的掌握钻探工况。钻探参数采集的方法是通过传感器采集压力、转速、位移、流量、液位等物理参数，使用配套的软硬件设备进行数据转换和处理，在人机交互界面显示直观的工程参数。该系统根据野外现场不同工作环境可以使用互联网、GPRS终端或者北斗卫星终端把现场实时工程数据无线传输至远程服务器上，用户通过手机或电脑即可查看到现场的实时或历史工程数据。采用本系统可以预防和减少钻探事故，为事故处理提供数据支撑，为实现钻探自动化、智能化提供基础数据。  相似文献   

大凌河河口地区中更新世晚期以来沉积环境演化     

商志文  李建芬  姜兴钰  李琰  王宏 《地质学报》2020,94(8):2433-2445

大凌河河口地区LZK06孔40m以浅岩心的沉积学、古生物学和年代学等综合研究以及该地区LZK02- 04钻孔资料，揭示了研究区中更新世晚期以来经历了两次海侵- 海退旋回，依次形成了中更新世晚期湖相/河流相 SymbolnB@ 晚更新世海相- 湖相/河流相 SymbolnB@ 全新世海相- 河流相地层。全新世早中期由于物源供给很少，研究区处于长达约10ka的饥饿滞留相沉积环境，平均沉积速率仅约0. 02~0. 05cm/a。全新世晚期约1500a cal BP以来，由于人类活动导致水土流失，河流输砂量增加，研究区开始了快速加积过程，平均沉积速率约0. 9~1. 2cm/a，下辽河平原被快速充填，开始成陆。与全球海面变化时空分布特征的对比，推断辽东湾的第II海相层发育于MIS 5- MIS 3早期，第I海相层发育于MIS 1阶段高海面时期。晚更新世以来频繁的海面升降是辽东湾泥质海岸带地层和环境演化的主要控制因素。  相似文献   

Deep gold mineralization features of Jiaojia metallogenic belt,Jiaodong gold Province: Based on the breakthrough of 3000 m exploration drilling     

《China Geology》2020,3(3):385-401

Recently, continuous breakthroughs have been made about deep gold prospecting in the Jiaodong gold province area of China. Approximately 5000 t of cumulative gold resources have been explored in Jiaodong, which has thus become an internationally noteworthy gold ore cluster. The gold exploration depth has been increased to about 2000 m from the previous <1000 m. To further explore the mineralization potential of the Jiaodong area at a depth of about 3000 m, the Shandong Institute of Geological Sciences has drilled an exploratory drillhole named “Deep drillhole ZK01” to a depth of 3266 m. Hence, as reported herein, the mineralization characteristics of the Jiaojia metallogenic belt have been successfully documented. ZK01 is, to date, the deepest borehole with an gold intersect in China, and constitutes a significant advance in deep gold prospecting in China. The findings of this study further indicate that the depth interval of 2000 m to 4000 m below the ground surface in the Wuyi Village area incorporates 912 t of inferred gold resources, while the depth interval of 2000 m to 4000 m below the surface across the Jiaodong area possesses about 4000 t of inferred gold resources. The Jiaojia Fault Belt tends to gently dip downward, having dip angles of about 25° and about 20° at vertical depths of 2000 m and 2850 m, respectively. The deep part of the Jiaojia metallogenic belt differs from the shallow and moderately deep parts about fracturing, alteration, mineralization, and tectonic type. The deep zones can generally be categorized from inside outward as cataclastic granite, granitic cataclasite, weakly beresitized granitic cataclasite, beresitized cataclasite, and gouge. These zones exhibit a gradual transitional relation or occur alternately and repeatedly. The mineralization degree of the pyritized cataclastic granite-type ore in the deep part of the Jiaojia metallogenic belt is closely related to the degree of pyrite vein development; that is, the higher the pyrite content, the wider the veins and the higher the gold grade. Compared to the shallow gold ores, the deep-seated gold ores have higher fineness and contain joseite, tetradymite, and native bismuth, suggesting that the deep gold mineralization temperature is higher and that mantle-sourced material may have contributed to this mineralization. ZK01 has also revealed that the deep-seated ore bodies in the Jiaojia metallogenic belt are principally situated above the main fracture plane (gouge) and hosted within the Linglong Granite, contradicting previous findings indicating that the moderately shallow gold ore bodies are usually hosted in the contact zone between the Linglong Granite and Jiaodong Group or meta-gabbro. These new discoveries are particularly significant because they can help correct mineralization prospecting models, determine favorable positions for deep prospecting, and improve metallogenic prediction and resource potential evaluation.  相似文献   

Late Quaternary paleo sea level geomorphological markers of opposite vertical movements at Salina volcanic island (Aeolian Arc)     

F. Lucchi  A. Ricchi  C. Romagnoli  D. Casalbore  R. Quartau 《地球表面变化过程与地形》2019,44(12):2377-2395

Raised marine terraces and submerged insular shelves are used through an integrated approach as markers of relative sea level changes along the flanks of the Salina volcanic island (Aeolian Arc, southern Italy) for the purpose of evaluating its crustal vertical deformation pattern through time. Paleo sea level positions are estimated for the terrace inner margins exposed subaerially at different elevations and the erosive shelf edges recognized offshore at different depths. Compared with the eustatic sea levels at the main highstands (for the terraces) and lowstands (for the shelf edges) derived from the literature, these paleo sea level markers allowed us to reconstruct the interplay among different processes shaping the flanks of the island and, in particular, to quantify the pattern, magnitudes and rates of vertical movements affecting the different sectors of Salina since the time of their formation. A uniform uplift process at rates of 0.35 m ka⁻¹ during the Last Interglacial is estimated for Salina (extended to most of the Aeolian Arc) as evidence of a regional (tectonic) vertical deformation affecting the sub-volcanic basement in a subduction-related geodynamic context. Before that, a dominant subsidence at rates of 0.39–0.56 m ka⁻¹ is instead suggested for the time interval between 465 ka (MIS 12) and the onset of the Last Interglacial (MIS 5.5, 124 ka). By matching the insular shelf edges with the main lowstands of the sea level curve, a relative age attribution is provided for the (mostly) submerged volcanic centres on which the deepest (and oldest) insular shelves were carved, with insights on the chronological development of the older stages of Salina and the early emergence of the island. The shift from subsidence to uplift at the Last Interglacial suggests a major geodynamic change and variation of the stress regime acting on the Aeolian sub-volcanic basement. © 2019 John Wiley & Sons, Ltd.  相似文献   

可见光下Li+/CNTS-TiO2光催化剂降解海洋柴油污染的研究          下载免费PDF全文

于晓彩  王力萍  刘京华  郭美岑  朱婉婷  廖佳琪  吴云英 《海洋学研究》2019,37(1):52-58

通过溶胶-凝胶法,以CNTS-TiO₂为前驱物制备了Li⁺掺杂CNTS-TiO₂的纳米复合光催化剂(以下均称为Li⁺/CNTS-TiO₂),采用X射线衍射(XRD)、扫描电镜(SEM)等测试手段对光催化剂进行表征,结果表明制得的催化剂为纳米材料且在TiO₂的基础上增大了比表面积。利用掺杂量为3%的Li⁺掺杂CNTS-TiO₂复合光催化剂(以下均称为3%Li⁺/CNTS-TiO₂)光催化降解海洋柴油污染,在可见光条件下考察了Li⁺掺杂量、煅烧温度、光催化剂投加量、柴油初始质量浓度、光催化反应时间、H₂O₂质量浓度等条件对光催化实验的影响。进行正交实验,确定最优化工艺条件为:Li⁺掺杂量为3%,光催化剂的煅烧温度为600 ℃,3%Li⁺/CNTS-TiO₂的投加量为0.1 g/L,降解柴油初始质量浓度为0.4 g/L,光催化反应时间为3 h,H₂O₂质量浓度为0.6 g/L,降解率可以达到95%以上。同时对此光催化剂进行应用试验,试验结果表明光催化剂去除效果优异,去除率可达91.87%。  相似文献